Dark Light

YFROBOT KIT CHASSIS METALLIQUE 4WD ROUE 72MM AVEC MOTEURS

SKU: ROB088

Disponibilité :

Disponible en stock


159,000 DT

Disponible en stock

The steering mechanism of the servo steering car chassis is different from that of a typical chassis. It uses a rear-wheel motor drive with a front steering mechanism to achieve the car’s forward, backward, and left and right turns, while a chassis without a steering structure usually uses a left-right differential steering structure. Similar to professional remote control racing car principles, the steering part uses two pull rods connected to the servo to control the car’s left and right turns. It has only one motor and an integral die-cast aluminum fixing piece that tightly engages the motor with the transmission shaft. The transmission shaft has two flanged bearings to ensure that the motor rotates more flexibly. There are two acrylic plates on top that can be used to fix accessories such as the main board, motor drive, and battery.

Shipping Method

The car chassis is shipped as loose pieces and requires self-installation upon receipt. The packaging box (size 30 * 20 * 4.5cm  weight 750g).

Specifications

  • Dimensions: 250 * 148 * 64mm
  • Product weight: 700g
  • Max load capacity: 1500g
  • Ground clearance: 14mm
  • Turning radius: 450mm
  • Operating voltage: 6-12v
  • Motor speed: 10000rpm
  • Reduced speed: 310rpm
  • Gearbox speed ratio: 1:18.9 / 1:61.2
  • Rated current: 0.65A
  • Motor power: 2.5w
  • Reference speed: 1.2m/s @9v
  • Drive system: Ackermann steering, front-wheel steering, rear-wheel drive
  • Servo voltage: 4.5-6v
  • Drive current: 400-800mA

Motor parameters

Rated voltage (V) Rated speed (rpm) Load current (A) Rated torque (kg.cm) Rated power (W) Stall current (A) Vehicle speed (m/s)
8.4 330 0.7 1.5 5 4 1.6
12 495 0.9 2.8 8 6 2.3

 

Aperçu:

  • Châssis 4WD avec essieu directeur servo
  • le châssis peut se comporter comme une voiture normale grâce à l’essieu directeur
  • équipé de moteurs à engrenages métalliques
  • avec des trous de montage pour Arduino, des blindages de moteur et bien plus encore
  • avec pare-chocs
  • Taille: 19,2*14,5 cm

Contenu de la livraison :

  • 1x Kit châssis YFROBOT – avec essieu directeur
  • Aucune instruction de montage n’est incluse. La structure est en grande partie explicite. De plus, les instructions de montage sont disponibles en ligne au format PDF et également sous forme de vidéo.
  • Vidéo de montage : https://mp.weixin.qq.com/s/dOADMsXeo7Lxebgg0yiY5Q

UGS : ROB088 Catégorie :

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.