Dark Light
INTERRUPTEUR THERMIQUE -THERMOSTAT NC - 250VAC

INTERRUPTEUR THERMIQUE -THERMOSTAT NC – 250VAC

SKU: KSD
Disponibilité :

Disponible en stock

A partir de 3,000 DT

KSD301 KSD302 Thermal Control Switch 40°C – 150°C 10A 16A Normally Closed 
Product Information:
Product Introduction:
  • KSD301 is a small bimetal thermostat with housing. It is a temperature relay device. Using the principle that the disc-shaped bimetallic sheet produces instant beating under the action of temperature, through the action of the mechanism, the contacts move quickly to achieve the purpose of disconnecting or connecting the circuit.
  • Its working temperature is fixed and does not need to be adjusted. The action is reliable and crisp, the arc is small, the service life is long, and the radio interference is less.
KSD301 Technical Parameter
Rated electrical parameters:
①5A series: AC250V, 5A/AC120V, 7A (resistive load)
②10A series: AC250V, 10A (resistive load)
③16A series: AC250V, 16A (resistive load)
  • Normal electrical strength: AC50Hz2000V, no breakdown and no flashover for one minute
  • Normal insulation resistance: greater than 100M0-(measured by 500V megohmmeter)
  • Contact form: single pole single throw (S.P.S.T), divided into three types:
    ①Turn on at suffocating temperature, disconnect when the temperature rises, and turn on when the temperature drops
    ②Disconnect at room temperature, the contact is connected when the temperature rises, and the contact is disconnected when the temperature drops
    ③Turn on at room temperature, and the contact will turn off when the temperature rises. Manual reset on
  • Grounding method: connected to the grounding metal part of the equipment through the metal cover of the thermostat
  • Operating temperature: 70°C±5°C
  • Reset temperature: 52°C±10°C
KSD302 Technical Parameters:
Electrical parameters: AC 250V, 16A 50~60Hz (resistive load)
  • Operating temperature range: -10~260°C, temperature accuracy: ±2±3±5±10°C
  • Temperature difference between recovery and action: 8~100°C (optional)
  • Wiring method: plug terminal 250# (bend 0~90° optional); plug terminal 187# (bend 0~90° optional, thickness 0.5, 0.8MM optional)
  • Service life: ≥100,000 times
  • Electric strength: AC 50Hz 1800V for 1MIN, no flicker, no breakdown
  • Contact resistance: ≤50MΩ
  • Insulation resistance: ≤100MΩ
  • Contact form:
    ①Normally closed type: When the temperature rises, the contact is off, and the temperature drops, and the contact is on
    ②Normally open type: the temperature rises, the contact is connected, the temperature drops, the contact is disconnected
  • Shell protection grade: IP00
  • Grounding method: connected to the grounding metal parts of the device through the metal shell of the thermostat
  • Installation method: KSD302 series install ordinary movable ring, install small round movable ring, install flat movable ring, ordinary large aluminum cover with mounting holes, and extended aluminum cover with mounting holes.
Structure and application:
  • KSD302 series product is a thermostat that uses bimetallic sheet as temperature sensing component. When the electrical appliance is working normally, the bimetallic sheet is in a free state, and the contact is in a closed/disconnected state. When the temperature reaches the operating temperature, the bimetallic sheet is in a free state. The heat generates internal stress and acts quickly, opens/closes the contacts, cuts off/connects the circuit, and thus plays the role of temperature control. When the appliance cools down to the reset temperature, the contacts close/open automatically and return to normal working condition.
  • Widely used in water dispensers, water heaters, sandwich toasters, dishwashers, dryers, disinfection cabinets, microwave ovens, electric coffee pots, electric cookers, refrigerators, air conditioners, glue dispensers, office equipment, car seat heaters, etc. appliance.
  • Features: It has the characteristics of stable performance, high precision, small size, light weight, high reliability, long life, and little interference to radio.
Precautions
1. When using contact temperature-sensing installation, the metal cover should be close to the installation surface of the controlled appliance. To ensure the temperature-sensing effect, the temperature-sensing surface should be coated with thermally conductive silicone grease or other thermally conductive medium with similar properties.
2. Do not collapse, loosen or deform the top of the cover during installation, so as not to affect the performance.
3. Do not allow liquid to penetrate into the inside of the temperature controller, do not cause cracks in the shell, and do not arbitrarily change the shape of the external terminals.
4. When the product is used in a circuit with a current of no more than 5A, the copper core cross-section should be 0.5-1mm² for wire connection. If it is used in a circuit with a current of no more than 10A, the copper core cross-section should be 0.75-1.5mm² for wire connection.
5. The product should be stored in a warehouse where the relative humidity is less than 90% and the ambient temperature is below 40°C, which is ventilated, clean, dry and free of corrosive gases.
UGS : KSD Catégorie :
Style

KSD301, KSD302
Température en °C

40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100, 105, 110, 115, 120, 125, 130, 135, 140, 145, 150, 190

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Produits similaires

Nous Contacter 29002608 - 92168725 - 55560037
Contact Info
08 Rue Chedhly Kallela, Etage01 Boumhel Tunisie 2097
Nous Contacter 29002608 - 92168725 - 55560037