ADAPTATEUR SERIE RS485-USB YF-U5C3

The original three-chip solution supports WIN10 system and lower version systems; with signal indicator light, data transmission is visible; with TVS protection, lightning protection, surge protection and anti-static shock protection, the operation is more stable and reliable. With a set of 5V power output, it is convenient for equipment debugging and power supply.

Driver download link: http://pan.baidu.com/s/1gdzlAMJ (Download the first one ) 

◆Support Windows95/Win98/Win2000/WinXP/Vista/Win7/Linux/WIN8/WIN8.1/WIN10 , etc.

Product Overview: This is a universal USB to RS-485 converter. It does not require an external power supply and can convert single-ended USB signals into balanced differential RS-485 standard signals. It provides surge protection power for each line, as well as surge voltages generated on the line due to various reasons. The extremely small inter-electrode capacitance ensures high-speed transmission of the RS-485 interface . The RS-485 end is connected via a DB9 male connector. No jumper wire settings are required to achieve half-duplex (RS-485) mode conversion, plug and play. Ensure that it is suitable for all existing communication software and interface hardware.

Features:

■Fully compatible with USB ( Universal Serial Bus ) Rev 2.0

■Support RS-485 interface

■ RS-485 interface DB pin connector

■ Data transmission rate above 1Mbps

■Support automatic handshake protocol

■ Power is directly taken from USB bus, no external power supply required

■Anti-static protection, lightning protection, surge protection, with TVS

Performance indicators:

◆ USB ( Universal Serial Bus ) Rev 2.0 ; compatible with Rev1.1

◆ USB signal: VCC , DATA+ , DATA- , GND , FG

◆ RS-485 signal: A/D+ , B/D-

◆Working mode: Asynchronous working

◆Baud rate: 75bps ~ 115200bps ( automatic flow control on RS-485 end )

◆Transmission distance: RS485 end 1200 meters , USB port no more than 3 meters

◆ RS-485 supports 255 nodes

◆Interface type: USB end: AM ( male ) port ; RS-485 end: DB-9M ( pin ) port; DR9 pin interface input terminal block

◆Product size: 100CM

◆ USB powered , no external power required

◆ The DB-9M interface also provides +5V power ( which can be used to power external devices and the USB bus )

◆Static power consumption within 0.04W , static working current within 7 ~ 8mA

◆Support Windows95/Win98/Win2000/WinXP/Vista/Win7/Linux/WIN8/WIN8.1/WIN10 , etc.